Skip to main content
Strong Asset Tags
Asset tags for manufacturing

Asset Tags for Manufacturing

Tags that survive coolant, swarf, line vibration, and washdowns.

On a factory floor, the asset tag fights coolant mist, swarf, vibration, and weekly washdown cycles. Strongest-tier construction with our permanent adhesive is engineered for these conditions: bonded to powdercoat, sealed against solvent under a 6-mil overlaminate, so the artwork doesn't scrape off when parts are handled.

Asset Tags for Manufacturing application

Best-practice install pattern

  • 01Specify Strongest-tier for any asset that sees coolant or solvent.
  • 02Use Data Matrix instead of Code 128 on small parts. The 2D code reads through scratching where 1D fails.
  • 03Place tags on the control-panel side, not the chip-shower side.

Pricing by durability tier

Per-tag pricing, no setup fees and no die charges. Pick the tier that matches the worst day your tag will face.

Tier
Strong

Clean, economical indoor workhorse. Smooth surfaces, crisp barcodes.

Outdoor
Rated 2 years outdoors
Material
2 mil POLYESTER
Best for
Smooth surfaces. Tamper-evident option available.
Pricing (per tag)
QuantityUnit pricePack total
500$0.65 ea$325
1,000$0.59 ea$590
No setup fees. Volume pricing above 1,000 in the spec builder.
Tier
Stronger

Full-color laminated vinyl. Strong adhesive, outdoor-rated.

Outdoor
Rated 2 to 5 years outdoors
Material
5 mil Laminated VINYL
Best for
Smooth surfaces. Full-color branding that survives UV and water.
Pricing (per tag)
QuantityUnit pricePack total
100$1.19 ea$119
250$0.99 ea$248
500$0.89 ea$445
1,000$0.79 ea$790
No setup fees. Volume pricing above 1,000 in the spec builder.
Tier
Recommended
Strongest

The bulldozer-tread tier. 12 mil plastic, EXTREME protection. Strongest adhesive.

Outdoor
Rated 5+ years outdoors
Material
12 mil PLASTIC
Best for
Smooth or textured surfaces. Mission-critical assets in punishing conditions. Sticks to difficult substrates.
Pricing (per tag)
QuantityUnit pricePack total
100$1.59 ea$159
250$1.39 ea$348
500$1.29 ea$645
1,000$1.05 ea$1,050
No setup fees. Volume pricing above 1,000 in the spec builder.

FAQ for manufacturing

Will the tag survive a parts-washer cycle?

If the cycle is below 180°F and the solvent is standard industrial degreaser, yes. For caustic or hot-acid washdowns, contact us about specialty constructions.

Stop replacing labels. Start trusting them.

Send us a photo of where the tag has to live. We ship samples in the format and size you'd use. No setup fees, low minimums, no obligation.